WinWedge Sample Excel Spreadsheets for specific Instruments

WinWedge Knowledge Base

	Quick Start Guide to Setting Up the Wedge
	WinWedge Tutorial
	Code Samples
	Troubleshooting
	WinWedge Tricks
	Understanding DDE

Additional Resources
	Introduction to Serial Communications
	WinWedge Manual online
	DDE Commands Supported by Software Wedge
	Contact Support

Saved Configuration Files for Specific Instruments with Excel Spreadsheets

Each downloadable file is a self-extracting zip file containing a "Read Me" file, WinWedge configuration files, and a sample Excel spreadsheet. If you are unsure which version of WinWedge you have open WinWedge and click on HELP > About.

Also listed here are (what we believe to be) the standard settings for each device. This information is based upon data gathered from the customers and/or manufactures of these devices. We cannot guarantee that it is accurate or up to date. When in doubt consult your device's user manual or contact the manufacturer. The sample spreadsheets and configurations are based on these settings so you may need to modify them.

3D Instruments: Star Series Pressure Calibrator Std Settings: 2400, N, 8, 1, None Transmit Data: N/A DTG-6000 Pressure Gauge Std Settings: 9600, N, 8, 1, None Transmit Data: N/A	Select your Instrument: Select your version of WinWedge:
Bowers Metrology: All electronic measuring tools, including Bore gauges and Hole gauges Std Settings: 4800, E, 7, 2, None Transmit Data: Toggle DTR Line	Please select your version of WinWedge:
Denver: Accumet pH meter Std Settings: 4800, N, 8, 1, Hardware Transmit Data: N/A Moisture Analyzer Std Settings: 4800, N, 8, 1, None Transmit Data: N/A Balance Std Settings: 300, N, 8, 1, None Transmit Data: P<CR>	Select your Denver Instrument: Select your version of WinWedge:
DGH Corp: Most DGH modules Std Settings: 300, N, 8, 1, None Transmit Data: $1RD<CR>	Please select your version of WinWedge:
Fowler: Sylvac Calipers, gauges, and other measuring instruments Std Settings: 4800, E, 7, 1, None Transmit Data: Toggle DTR Line	Please select your version of WinWedge:
Imada: Digital Force Gauge Std Settings: 2400, N, 8, 1, None Transmit Data: D<CR> Peak Mode: P<CR> Tare: Z<CR>	Please select your version of WinWedge:
Mark-10: Digital Force Gauge Std Settings: 9600, N, 8, 1, None Transmit Data: ?<CR>	Please select your version of WinWedge:
Mettler: pH meter Std Settings: 2400, E, 7, 1, None Transmit Data: R Balance Std Settings: 2400, E, 7, 1, None Transmit Data: S<CR><LF> Alternate Transmit cmd: W<CR><LF> Titrator Std Settings: 2400, N, 8, 1, Xon/Xoff Transmit Data: N/A	Select your Mettler Instrument: Select your version of WinWedge:
Ohaus: Voyager density balance Std Settings: 2400 or 9600, N, 8, 1, None Transmit Data: P<CR><LF>	Please select your version of WinWedge:
Orion: pH meter Std Settings: 1200, N, 8, 1, None Transmit Data: pr<CR>	Please select your version of WinWedge:
Rice Lake Weighing systems: IQ Plus 510/710 IQ Plus 590-DC IQ Plus 355 IQ Plus 390-DC Std Settings: 9600, N, 8, 1, None Transmit Data: KPRINT<CR>	Please select your version of WinWedge:
Sartorius: Balance Std Settings: 1200, Odd, 7, 1, None Transmit Data: ESC (ASCII 27) P Note: Has unusual pin-outs so cannot use a standard serial cable	Please select your version of WinWedge: